科研之友
微信
新浪微博
Facebook
分享链接
摘要
The purpose of this study is to optimize the existing carbon dioxide (CO(2)) flood in deep dolomite formations by improving oil sweep efficiency of miscible CO(2) floods and enhancing the conformance control. A full compositional simulation model using a detailed geologic characterization was built to optimize the injection pattern. The model is a quarter of an inverted nine-spot and covers 20 acres of field formation. Geologic description was used to construct the simulation grids. The simulation layers represent actual flow units and resemble the large variation of reservoir properties. History match was performed to validate the model. Several sensitivity runs were made to improve the CO(2) sweep efficiency and increase the oil recovery. Finally, the optimum CO(2) injection rate for dolomite formations was determined approximately. Simulation results also indicate that a water-alternating-gas (WAG) ratio of 1:1 along with an ultimate CO(2) slug of 100% hydrocarbon pore volume (HCPV) will allow an incremental oil recovery of 18%. The additional recovery increases to 34% if a polymer is injected as a conformance control agent during the course of the WAG process at a ratio of 1:1. According to the results, a pattern reconfiguration change from the nine spot to staggered line drive would represent an incremental oil recovery of 26%.
- 出版日期2010-6
- 单位中国石油大学（北京）
