科研之友
微信
新浪微博
Facebook
分享链接
摘要
By way of experiments and ray tracing simulations, we investigate the angular dependence of moire fringes induced by metal grids of various shapes (e. g., rectangular, square, hexagonal, and random metal grids) for touch screen panels (TSPs). To quantify the moire phenomenon, we have utilized the standard deviation (SD) calculated from the simulated ray distribution. The SD value is significantly decreased (i. e., the moire phenomenon is substantially suppressed) with the rectangular and square metal grids when the crossing angle between the metal grid and a black matrix (BM) of display panels lies within the range between 20 degrees and 60 degrees. For the hexagonal metal grid, there appears a sharp dip corresponding to the minimum SD value every 30 degrees rotation angle. However, the SD value is observed to be very high near the crossing angles at which a sharp dip occurs. Though no angular dependence arises and no moire patterns appear with the random metal grid, yet the SD value is even higher due to point defects, compared with the rectangular and square metal grids. These results are in qualitatively good agreement with the experiment results observed with the naked eye.
- 出版日期2015-1
