Analysis and Evaluation of Power Formulations for Wood and Hardboard Using Radio Frequency and Microwave Energy

作者：Erchiqui F^*

来源：Drying Technology, 2014, 32(8): 946-959.

DOI：10.1080/07373937.2013.875923

• Beer-Lambert's law
• Critical thickness
• Frequency
• Maxwell's equation
• Moisture content
• Structural orientation
• Temperature

This article analyzes the influence of frequency, temperature, moisture content, and structural orientation on the applicability of the Beer-Lambert law for various wood species using radio frequency and microwave radiation. To achieve this objective, the study compares the power dissipation computed from Maxwell's equation and Lambert's power law. The wood species considered are white oak (Quercus alba), Douglas fir (Pseudotsuga menziesii), trembling aspen (Populus tremuloides), white birch (Betula paperyfera), yellow birch (Betula alleghaniensis), sugar maple (Acer saccharum), and four commercial hardboards. The dielectric constant and dielectric loss factor are examined as a function of moisture conditions, temperature, frequencies, and the three principal structural orientations. The study involved 3,000 complex dielectric constants. It was found that the radial critical thickness is somewhat smaller than the tangential critical thickness (0.95 times smaller) and the longitudinal critical thickness is significantly smaller than the radial (0.52 times). It was demonstrated that the critical thickness L-crit above which the Beer-Lambert law is valid for all of the wood species studied under various conditions obeys the following conditions: log(10)(L-crt) = 0.999 0.999 log(10)(beta(-1))+0.4122, where beta(-1) is the penetration depth (cm). In the case of microwave radiation, the critical thickness can be estimated from L-crt = 2.615 beta(-1) = 0.0626. Finally, a model is proposed to take into consideration the effect of moisture content with frequency (or with attenuation constant).

• 出版日期2014