科研之友
微信
新浪微博
Facebook
分享链接
摘要
Hierarchical macro-mesoporous nanofibrous gamma-alumina (Al2O3_nf) synthesized by a surfactant-templated route has been applied for the first time as support for preparing RuCo catalysts at two different loading levels (20 wt% Co-0.5 wt% Ru and 30 wt% Co-1.0 wt% Ru). Equivalent catalysts involving four commercial aluminas (Sasol, mean pore size ranging from 6.0 to 32.4 nm) have also been prepared for comparison purposes. The materials have been exhaustively characterized (XRD, elemental analysis, ICP-CES, N-2 physisorption, Hg intrusion porosimetry, TEM-HRTEM, FE-SEM, H-2 chemisorption, and H-2-TPR) and evaluated for Fischer-Tropsch synthesis (FTS) in a fixed-bed reactor under realistic conditions. Nanofibrous alumina displayed simultaneously the highest specific surface area (321 m(2)/g) and the largest macroporosity. The introduction of the original nanofibrous morphology allowed us to conclude that Co dispersion is mainly driven by support surface area rather than by pore size. By taking advantage of these properties, RuCo/Al2O3_nf catalysts bearing both the highest metal dispersion and macroporosity have been used in this work to ponder the relevance of dispersion and intrapellet diffusion on FTS catalyst performance, which is of paramount importance for designing improved Co-based FTS catalysts. While initial (TOS -> 0) FTS rates were related to cobalt dispersion through the recently reported particle size-TOF dependence, pseudo-steady-state FTS activity and selectivity were dictated by both dispersion and support porosity, evidencing the kinetic relevance of CO and alpha-olefin intrapellet diffusion through the liquid phase filling the catalyst pores under working conditions. At high metal loadings, where the relative population of intrinsically less active and C5+ selective Co-0 nanoparticles is decreased, RuCo/Al2O3_nf catalyst displayed the highest cobalt-time-yield and diesel productivity.
- 出版日期2009-4-25
