An efficient titanium foil based perovskite solar cell: using a titanium dioxide nanowire array anode and transparent poly(3,4-ethylenedioxythiophene) electrode

作者：Xiao, Yaoming^*; Han, Gaoyi; Zhou, Haihan; Wu, Jihuai

来源：RSC Advances, 2016, 6(4): 2778-2784.

DOI：10.1039/c5ra23430a

• HIGHLY EFFICIENT
• TIO2 NANOWIRES
• PERFORMANCE
• PHOTOANODES
• NANOFIBERS
• DEPOSITION
• NETWORK

A titanium (Ti) foil based perovskite solar cell (PSC) is devised and prepared by employing titanium dioxide nanowire (TNW) arrays and titanium dioxide nanoparticles (TNPs) on Ti foil substrates as the electron transporting layer (ETL). The TNW array is desirable for the PSC, since it can provide direct pathways for the rapid collection and transmission of photo-generated electrons. The Ti foil substrate has many advantages such as flexibility, low sheet resistance, and excellent mechanical stability. The sunlight illuminates through the highly transparent poly(3,4-ethylenedioxythiophene) (PEDOT) film on the indium doped tin oxide/polyethylene naphthalate (ITO/PEN) substrate. The transparent PEDOT electrode can be used as the hole transporting layer (HTL) due to the well matched band positions for charge separation and transport. As a result, the Ti foil based light-weight PSC with TNW arrays yields an efficiency of 13.07% with an active area of 1.00 cm(2), which is higher than that of the PSC with TNPs (9.93%). These promising results highlight the potential application of the PEDOT and Ti foil in cost-effective, large-area, and flexible PSCs.

• 出版日期2016
• 单位华侨大学; 山西大学