Dynamic modeling of gas phase propylene homopolymerization in fluidized bed reactors

作者：Shamiri Ahmad; Hussain Mohamed Azlan^*; Mjalli Farouq Sabri; Mostoufi Navid; Shafeeyan Mohammad Saleh

来源：Chemical Engineering Science, 2011, 66(6): 1189-1199.

DOI：10.1016/j.ces.2010.12.030

• Mathematical modeling
• Fluidization
• Propylene polymerization
• Catalyst
• Emulsion
• Bubble

A new model with comprehensive kinetics for propylene homopolymerization in fluidized bed reactors was developed to investigate the effect of mixing, operating conditions, kinetic and hydrodynamic parameters on the reactor performance as well as polymer properties. Presence of the particles in the bubbles and the excess gas in the emulsion phase was considered to improve the two-phase model, thus, considering the polymerization reaction to take place in both the bubble and emulsion phases. It was shown that in the practical range of superficial gas velocity and catalyst feed rate, the ratio of produced polymer in the bubble phase to the total production rate is roughly between 10% and 13%, which is a substantial amount and cannot be ignored. Simulation studies were carried out to compare the results of the improved two-phase, conventional well-mixed and constant bubble size models. The improved two-phase and well mixed models predicted a narrower and safer window at the same running conditions compared with the constant bubble size model. The improved two-phase model showed close dynamic behavior to the conventional models at the beginning of polymerization, but starts to diverge with the evolution of time.

• 出版日期2011-3-15