A High-Q AFM Sensor Using a Balanced Trolling Quartz Tuning Fork in the Liquid

作者：Zhang, Yingxu; Li, Yingzi^*; Song, Zihang; Lin, Rui; Chen, Yifu; Qian, Jianqiang

来源：Sensors (Switzerland), 2018, 18(5): 1628.

DOI：10.3390/s18051628

• atomic force microscope
• liquid environment
• balanced trolling quartz tuning fork
• high quality factor
• dynamic mechanical behavior

A quartz tuning fork (QTF) has been widely used as a force sensor of the frequency modulation atomic force microscope due to its ultrahigh stiffness, high quality factor and self-sensing nature. However, due to the bulky structure and exposed surface electrode arrangement, its application is limited, especially in liquid imaging of in situ biological samples, ionic liquids, electrochemical reaction, etc. Although the complication can be resolved by coating insulating materials on the QTF surface and then immersing the whole QTF into the liquid, it would result in a sharp drop of the quality factor, which will reduce the sensitivity of the QTF. To solve the problem, a novel method, called the balanced trolling quartz tuning fork (BT-QTF), is introduced here. In this method, two same probes are glued on both prongs of the QTF separately while only one probe immersed in the liquid. With the method, the hydrodynamic interaction can be reduced, thus the BT-QTF can retain a high quality factor and constant resonance frequency. The stable small vibration of the BT-QTF can be achieved in the liquid. Initially, a theoretical model is presented to analyze the sensing performance of the BT-QTF in the liquid. Then, the sensing performance analysis experiments of the BT-QTF have been performed. At last, the proposed method is applied to atomic force microscope imaging different samples in the liquid, which proves its feasibility.

• 出版日期2018-5
• 单位北京航空航天大学