科研之友
微信
新浪微博
Facebook
分享链接
摘要
Batch adsorption experiments were conducted to investigate the removal of fluoride from aqueous solution by the addition of synthetic hydroxyapatites (HAps) with different particle sizes. Results showed that size-dependent defluoridation properties of HAps. Better performances were obtained with smaller particle sized HAps, which presented higher adsorption efficiency. Bulk HAp, the HAp sample with the largest particle size, presented the lowest percentage of fluoride removal. The isotherm studies showed that the Freundlich model was the best choice to describe the adsorption behaviors of nanosized HAps. However, the adsorption pattern of the bulk sample followed both Langmuir and Freundlich isotherms. All parameters that might influence the defluoridation process were assessed, which included the effect of adsorbent dose, initial fluoride concentration, contact time and the effect of temperature. The removal efficiency of fluoride increased with increasing adsorbent dose. Decrease of the initial fluoride concentration resulted in the increase of fluoride removal efficiency. The percentage of fluoride removal increased as the ambient pH decreased. Thermodynamic parameters suggested that the adsorption of fluoride onto HAp samples was physisorption and endothermic in nature. Moreover, adsorption kinetic study revealed that the adsorption process followed pseudo-second-order kinetics. This work indicated that synthetic hydroxyapatites, especially the smaller particle sized HAps, were efficient defluoridation materials.
