科研之友
微信
新浪微博
Facebook
分享链接
摘要
Nickel-based alloys exhibit excellent high-temperature strength and oxidation resistance; however, because of coarse grains and severe segregation in their welding joints, these alloys exhibit increased susceptibility to hot cracking. In this paper, to improve the hot-cracking resistance and mechanical properties of nickel-based alloy welded joints, sodium thiosulfate was used to simulate crystallization, enabling the nucleation mechanism under mechanical vibration to be investigated. On the basis of the results, the grain refinement mechanism during the gas tungsten arc welding (GTAW) of Inconel 601H alloy under various vibration modes and parameters was investigated. Compared with the GTAW process, the low-frequency mechanical vibration processes resulted in substantial grain refinement effects in the welds; thus, a higher hardness distribution was also achieved under the vibration conditions. In addition, the gamma' phase exhibited a dispersed distribution and segregation was improved in the welded joints with vibration assistance. The results demonstrated that the generation of free crystals caused by vibration in the nucleation stage was the main mechanism of grain refinement. Also, fine equiaxed grains and a dispersed gamma' phase were found to improve the grain-boundary strength and reduce the segregation, contributing to preventing the initiation of welding hot cracking in nickel-based alloys.
