An alternative method of determining the local interfacial shear strength from force-displacement curves in the pull-out and microbond tests

作者：Zhandarov Serge^*; Maeder Edith

来源：International Journal of Adhesion and Adhesives, 2014, 55: 37-42.

DOI：10.1016/j.ijadhadh.2014.07.006

• Pull-out
• Interfacial shear strength
• Interfacial friction
• Stress analysis
• Force-displacement curves

The traditional way of determining the local interfacial shear strength (IFSS), tau(d), between the fiber and the matrix in microbond and pull-out test includes the measurement of the debond force, F-d, at which interfacial crack initiates, and subsequents tau(d) calculation using the shear-lag analysis. However, for some fiber-matrix pairs the debond force, which manifests itself as a 'kink' in the force-displacement curve, cannot be reliably measured. We propose a new approach, based on measuring the maximum pull-out force, F-max and the initial post-debonding force, F-b, which does not require the knowledge of the F-d value. The comparison of the tau(d) values calculated for several fiber-matrix pairs using three different methods of data reduction demonstrated that the new method yielded results very similar to the traditional one. Thus, it can be recommended as an alternative technique if the debond force is indeterminable.

• 出版日期2014-12