科研之友
微信
新浪微博
Facebook
分享链接
摘要
This study evaluated the structural behavior of porticos made from eucalyptus glued boards, using wood of Eucalyptus sp and resorcinol formaldehyde adhesive. Three units, in real scale, of tri-articulated straight porticos, with a 5 meter porthole and a 26 degrees inclination, capable to support tiles covering placement were designed, constructed and subjected to load testing, until rupture. The amount of adhesive used in the construction of the porticos was 250 g/m(2) and the bonding pressure of 1.3 MPa. The Hankinson model was employed as an estimator of the glued joints strength, under different angles between the fibers. The average value for the last resistance of the structures was 4.63 times the design load, according to the criteria established by the ABNT, 1997. The structures showed satisfactory mechanical performance and deformations lower than the ones allowed by the standard. It was concluded there is technical feasibility to manufacture porticos fully bonded with small thickness veneers.
- 出版日期2016-10
