High -Performance Lithium-Sulfur Batteries with a Self-Assembled Multiwall Carbon Nanotube Interlayer and a Robust Electrode Electrolyte Interface

作者：Kim Hee Min; Hwang Jang Yeon; Manthiram Arumugam^*; Sun Yang Kook^*

来源：ACS Applied Materials & Interfaces, 2016, 8(1): 983-987.

DOI：10.1021/acsami.5b10812

• lithium-sulfur batteries
• multiwalled carbon nanotube
• bare MWCNT interlayer
• self-assembled MWCNT interlayer
• elemental sulfur electrode
• simple manufacturing process

Elemental sulfur electrode has a huge advantage in terms of charge-storage capacity. However, the lack of electrical conductivity results in poor electrochemical utilization of sulfur and performance. This problem has been overcome to some extent previously by using a bare multiwall carbon nanotube (MWCNT) paper interlayer between the sulfur cathode and the polymeric separator, resulting in good electron transport and adsorption of dissolved polysulfides. To advance the interlayer concept further, we present here a self-assembled MWCNT interlayer fabricated by a facile, low-cost process. The LiS cells fabricated with the self-assembled MWCNT interlayer and a high loading of 3 mg cm(-2) sulfur exhibit a first discharge specific capacity of 1112 mAh g(-1) at 0.1 C rate and retain 95.8% of the capacity at 0.5 C rate after 100 cycles as the self-assembled MWCNT interlayer facilitates good interfacial contact between the interlayer and the sulfur cathode and fast electron and lithium-ion transport while trapping and reutilizing the migrating polysulfides. The approach presented here has the potential to advance the commercialization feasibility of the LiS batteries.

• 出版日期2016-1-13