Addition of precipitated calcium carbonate filler to thermoplastic polyurethane adhesives

作者：Donate Robles Jessica; Miguel Martin Martinez Jose

来源：International Journal of Adhesion and Adhesives, 2011, 31(8): 795-804.

DOI：10.1016/j.ijadhadh.2011.07.008

• Polyurethane
• Dynamic mechanical analysis
• Infrared spectra
• Microscopy

Precipitated calcium carbonate filler (PCC) was added to a thermoplastic polyurethane adhesive (TPU). The addition of PCC produced a moderate increase in the rheological and viscoelastic properties of TPU due to the poor dispersion of filler (i.e. found to be clusters) and the weak interactions between the PCC nanoparticles and the polymer chains. The interactions were noticed by ATR-IR spectroscopy by displacement of the bands at 3326, 1729 and 1061 cm(-1) to higher wave number of the polyurethane. Furthermore, the first glass transition temperature of the polyurethane was found to decrease by adding PCC filler. The crystallinity of the soft segments in the TPU was decreased by adding PCC because of the disruption of the degree of phase separation in the polymer. The initial adhesive strength in PVC/TPU adhesive/PVC joints increased noticeably by adding PCC filler, the greater the amount of filler in the TPU, the greater the initial adhesive strength found. Finally, the highest final adhesive strength (72 h after joint formation) was obtained in the joint produced with the TPU containing 10 wt% PCC.

• 出版日期2011-12