Accurate nonlinear modeling for flexible manipulators using mixed finite element formulation in order to obtain maximum allowable load

作者：Esfandiar Habib; Korayem Moharam Habibnejad^*

来源：Journal of Mechanical Science and Technology, 2015, 29(9): 3971-3982.

DOI：10.1007/s12206-015-0842-2

• Accurate dynamic model
• Mixed finite element formulation
• Shear locking
• Large deformation
• DLCC

In this study, the researchers try to examine nonlinear dynamic analysis and determine Dynamic load carrying capacity (DLCC) in flexible manipulators. Manipulator modeling is based on Timoshenko beam theory (TBT) considering the effects of shear and rotational inertia. To get rid of the risk of shear locking, a new procedure is presented based on mixed finite element formulation. In the method proposed, shear deformation is free from the risk of shear locking and independent of the number of integration points along the element axis. Dynamic modeling of manipulators will be done by taking into account small and large deformation models and using extended Hamilton method. System motion equations are obtained by using nonlinear relationship between displacements-strain and 2nd PiolaKirchoff stress tensor. In addition, a comprehensive formulation will be developed to calculate DLCC of the flexible manipulators during the path determined considering the constraints end effector accuracy, maximum torque in motors and maximum stress in manipulators. Simulation studies are conducted to evaluate the efficiency of the method proposed taking two-link flexible and fixed base manipulators for linear and circular paths into consideration. Experimental results are also provided to validate the theoretical model. The findings represent the efficiency and appropriate performance of the method proposed.

• 出版日期2015-9