科研之友
微信
新浪微博
Facebook
分享链接
摘要
Processing by high-pressure torsion (HPT) was performed on disks of an Al-7075 alloy at room temperature. The alloy was initially annealed at 753 K and then processed by HPT under a pressure of 6.0 GPa up to a maximum of ten turns. Measurements of the Vickers microhardness showed lower values at the centers of the disks after small numbers of turns but higher numbers of turns led to a reasonable hardness homogeneity across each disk. After five turns, the grain size at the edge of the disk was similar to 250 nm. It is demonstrated that results from mechanical testing are consistent with the hardness and microstructural data.
- 出版日期2012-11
