科研之友
微信
新浪微博
Facebook
分享链接
摘要
In this study, arsenic adsorption to an Australian laterite has been examined for a particle-size range between 38 mu m and 25 mm. The results show that particle size influences both kinetic and equilibrium characteristics of arsenic adsorption. The equilibrium adsorption capacity increases from around 100 mg kg(-1) for laterite particles coarser than 4 mm, to around 160 mg kg(-1) for laterite particles between 75 mu m and 4 mm, and to over 200 mg kg(-1) for laterite particles finer than 75 mu m. The kinetic adsorption data can be fitted with the pseudo-second-order reaction model, in particular for finer particles where the film diffusion and/or surface reaction are important processes. The model-fitted rate constant remains steady for laterite particles coarser than 2 mm, increases moderately with particle size in the range between 75 mu m and 2 mm, and increases dramatically for laterite particles finer than 75 mu m. These arsenic adsorption behaviours can be explained by the relative importance of two particle-size-dependent processes: quick external-surface adsorption (more important for fine particles) and slow intraparticle adsorption (more important for coarse particles). Most of the external-surface adsorption completes in the first hour of the experiment. To apply the studied laterite for dissolved arsenic removal, it is recommended that fine particles, in particular finer than 75 mu m, should be used if the contact time is the limitation, and that coarse particles, in particular 2-4 mm, should be used if sufficient contact time is available.
- 出版日期2013-4
