A simple technology for phosphorus recovery using acid-treated concrete sludge

作者：Okano Kenji^*; Yamamoto Yasuhisa; Takano Hiroyuki; Aketo Tsuyoshi; Honda Kohsuke; Ohtake Hisao

来源：Separation and Purification Technology, 2016, 165: 173-178.

DOI：10.1016/j.seppur.2016.03.054

• Acid-treated concrete sludge
• Anaerobic sludge digestion liquor
• Bifunctional adsorption-aggregation agent
• HCL-soaking
• Phosphorus recovery
• Wastewater treatment

A simple technology for phosphorus (P) recovery from aqueous solution has been developed using acid treated concrete sludge (A-CS) as a bifunctional adsorption-aggregation agent. Dried particles of concrete sludge (CS), an alkaline waste containing hydrated cement and fine aggregates, were soaked in 1.3 M HCl at a concentration of 0.1 g/mL for 60 min. The HCl-soaking treatment solubilized alkaline substances such as Ca(OH)(2) and CaCO3, thereby releasing approximately 87% Ca2+ from the CS particles to the acid solution. When A-CS was added to 500-mL synthetic anaerobic sludge digestion liquor containing 273 mg/L of phosphate (Pi) at the Ca/P molar ratio of 2.5, A-CS showed 20 times higher 131 removal efficiency than that of untreated CS particles. Although A-CS could precipitate 72% P-i in 5-min free sedimentation, the Ca2+-rich liquid fraction of A-CS alone led to the precipitation of only 48% P-i. This suggests that the solid fraction of A-CS can serve as an auxiliary aggregation agent. When P-i recovery was examined using anaerobic sludge digestion liquor from a full-scale wastewater treatment, A-CS could recover 96% P-i at the Ca/P molar ratio of 2.5. Citrate-soluble P2O5 accounted for 19% of the dry weight of the recovered P-i product. The levels of heavy metals such as As, Cd, Pb, Ni, and Cr in the recovered P-i product were much below their regulatory standards for fertilizers.

• 出版日期2016-6-13