科研之友
微信
新浪微博
Facebook
分享链接
摘要
This article presents results on investigation of quantitative changes of polycyclic aromatic hydrocarbons (PAHs) during water treatment processes. PAHs constitute one of several classes of organic pollutants consisting of three or more fused benzene rings. Many of them are quite persistent and some are known to be carcinogens. That is why presentation of quantitative PAHs changes in water during preparation processes is very important. In Polish legislation and European Union law there are recommendations for PAHs concentration in drinking water. The limit value of the sum of 4 PAHs (benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[g,h,i]perylene, indeno[1,2,3-cd]pyrene) is 100ng/L. Limit concentration of benzo[a]pyrene defined in regulations (Polish and UE) is 10ng/L. The purpose of the present study was to determine changes of concentrations of PAHs in various stages of water treatment process and comparison the values of this index with the limits specified in valid Minister of Health Regulation and Council Directive 98/83/EC. A total concentration of 16 PAHs in the investigated water treatment processes was in the range of 39-204ng/L. The maximum level was recorded for water after intermediate ozonation. In different water treatment processes were observed fluctuations in PAHs concentrations. Decreased values were recorded among others after pre-ozonation and coagulation and after sedimentation process. Increase of PAHs level occurred after filtration through sand filters. Concentrations of 4 PAHs in drinking water is much below the limit value defined in Polish and UE legislation. Concentration of 16 PAHs in water after final chlorine-disinfection also meets the requirements of the regulation for 4 PAHs.
- 出版日期2013-10-20
