Ammonia-Sensing Using a Composite of Graphene Oxide and Conducting Polymer

作者：Hasani Amirhossein; Dehsari Hamed Sharifi; Lafmejani Milad Asghari; Salehi Alireza; Taromi Faramarz Afshar; Asadi Kamal; Kim Soo Young^*

来源：Physica Status Solidi-Rapid Research Letters, 2018, 12(5): 1800037.

DOI：10.1002/pssr.201800037

• ammonia sensors
• GaAs
• graphene oxide
• PEDOT:PSS
• Schottky diodes

The paper studies the performance of a gas sensor based on an organic/inorganic diode for ammonia (NH3) sensing under atmospheric conditions at room temperature and different humidity levels. The diode structure consists of a layer of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) deposited on top of n-type GaAs. The PEDOT:PSS layer that is filled with different ratios of graphene oxide (GO) is prepared from the solution phase. We show that the current-voltage (I-V) response of the diode and the sensing performance improve significantly by adding GO to the PEDOT:PSS layer. The sensing response is highest for a diode with 0.04wt.% of GO. At room temperature, the PEDOT:PSS:GO (0.04wt.%)/n-GaAs Schottky diode shows a sensitivity of 194 upon exposure to 20ppm of NH3 with rapid response and recovery times between 95 and 121s, respectively. The NH3 sensor based on PEDOT:PSS:GO is cost-effective, environmentally friendly, and easy to fabricate using low-cost solution-processing methods.

• 出版日期2018-5