Additives initiate selective production of chemicals from biomass pyrolysis

作者：Leng, Shuai; Wang, Xinde; Wang, Lei; Qiu, Huizhe; Zhuang, Guilin; Zhong, Xing; Wang, Jianguo^*; Ma, Fengyun; Liu, Jingmei; Wang, Qiang

来源：Bioresource Technology, 2014, 156: 376-379.

DOI：10.1016/j.biortech.2014.01.062

• Additive
• Biomass pyrolysis
• Chemical
• Selective production

To improve chemicals selectivity under low temperature, a new method that involves the injection of additives into biomass pyrolysis is introduced. This method allows biomass pyrolysis to achieve high selectivity to chemicals under low temperature (300 degrees C), while nothing was obtained in typical pyrolysis under 300 degrees C. However, by using the new method, the first liquid drop emerged at the interval between 140 degrees C and 240 degrees C. Adding methanol to mushroom scrap pyrolysis obtained high selectivity to acetic acid (98.33%), while adding ethyl acetate gained selectivity to methanol (65.77%) in bagasse pyrolysis and to acetone (72.51%) in corncob pyrolysis. Apart from basic chemicals, one high value-added chemical (2,3-dihydrobenzofuran) was also detected, which obtained the highest selectivity (10.33%) in corncob pyrolysis through the addition of ethyl acetate. Comparison of HZSM-5 and CaCO3 catalysis showed that benzene emerged in the liquid because of the larger degree of cracking and hydrodeoxygenation over HZSM-5.

• 出版日期2014-3
• 单位新疆大学; 浙江工业大学