A highly-sensitive L-lactate blosensor based on sol-gel film combined with multi-walled carbon nanotubes (MWCNTs) modified electrode

作者：Huang Jiadong; Song Zhao; Li Jing; Yang Yu; Shi Haibin; Wu Baoyan; Anzai Jun ichi; Osa Tetsuo; Chen Qiang^*

来源：Materials Science and Engineering: C , 2007, 27(1): 29-34.

DOI：10.1016/j.msec.2006.01.001

• sol-gel
• multi-walled carbon nanotubes
• chemically modified electrode
• L-lactate oxidase
• amperometric biosensor

A new type of amperometric L-lactate biosensor based on silica sol-gel and multi-walled carbon nanotubes (MWCNTs) organic-inorganic hybrid composite material was developed. The sol-gel film was used to immobilize L-lactate oxidase on the surface of glassy carbon electrode (GCE). MWCNTs were used to increase the current response and improve the performance of biosensor. The sol-gel film fabrication process parameters such as H2O:TEOS and pH were optimized, Effects of some experimental variables such as applied potential, temperature, and pH on the current response of the biosensor were investigated. Analytical characteristics and dynamic parameters of the biosensors with and without MWCNTs in the hybrid film were compared, and the results showed that analytical performance of the biosensor could be improved greatly after introduction of the MWCNTs. Sensitivity, linear range, limit of detection (S/N = 3) were 2.097 mu A mM(-1), 0.3 to 1.5 mM, 0.8 X 10(-3) mM for the biosensor without MWCNTs and 6.031 mu A mM(-1), 0.2 to 2.0 mM, 0.3 x 10(-3) mM for the biosensor with MWCNTs, respectively. This method has been used to determine the L-lactate concentration in real human blood samples.

• 出版日期2007-1
• 单位南开大学