A Nanocellulose Polypyrrole Composite Based on Microfibrillated Cellulose from Wood

作者：Nystrom Gustav; Mihranyan Albert; Razaq Aamir; Lindstrom Tom; Nyholm Leif; Stromme Maria^*

来源：Journal of Physical Chemistry B, 2010, 114(12): 4178-4182.

DOI：10.1021/jp911272m

It is demonstrated that it is possible to coat the individual fibers of wood-based nanocellulose with polypyrrole using in situ chemical polymerization to obtain an electrically conducting Continuous high-surface-area composite. The experimental results indicate that the high surface area of the water dispersed material, to a large extent, is maintained upon normal drying without the use of any solvent exchange. Thus, the employed chemical polymerization of polypyrrole oil the microfibrillated cellulose (MFC) nanofibers in the hydrogel gives rise to a composite, the structure of which-unlike that of uncoated MFC paper-does not collapse upon drying. The dry composite has a surface area of similar to 90 m(2)/g and a conductivity of similar to 1.5 S/cm, is electrochemically active, and exhibits an ion-exchange capacity for chloride ions of 289 C/g corresponding to a specific capacity of 80 mAh/g. The straightforwardness of the fabrication of the present nanocellulose composites should significantly facilitate industrial manufacturing of highly porous, electroactive conductive paper materials for applications including ion-exchange and paper-based energy storage devices.

• 出版日期2010-4-1