Design, fabrication and characterization of flexible MEMS accelerometer using multi-Level UV-LIGA

作者：Mahmood Md Sohel; Celik Butler Zeynep^*; Butler Donald P

来源：Sensors and Actuators A: Physical , 2017, 263: 530-541.

DOI：10.1016/j.sna.2017.07.007

• Flexible sensors
• MEMS accelerometer
• UV-LIGA

Surface micro-machined z-axis capacitive accelerometers were designed and fabricated on a flexible polyimide substrate, conformal down to 2 cm radius of curvature with the stresses sustained by all layers well below the yield strength for each material. A novel UV-LIGA fabrication technique was developed to realize a thicker proof-mass (8 mu m) compared to the spring (3 mu m), thus decoupling the two important parameters: the stiffness and the proof-mass to achieve higher sensitivity. Devices with three different sizes were fabricated with the capability of sustaining under distinct amount of acceleration and tuned to frequencies ranging from 600 Hz to 1100Hz. The largest device, having the area of 960 mu m x 960 mu m, showed a sensitivity of 187 fF/g with a SNR (Signal to Noise Ratio) of at least 100 when characterized at its resonance frequency of 800 Hz. The applied acceleration was +/- 4g in addition to gravitation.

• 出版日期2017-8-15