科研之友
微信
新浪微博
Facebook
分享链接
摘要
The effect of a pre-strain on the plasticity of copper single crystals subjected to in situ microshear deformation in a scanning electron microscope (SEM) is investigated. Pre-strains of 6.5 and 20% are imposed using [1 0 0] tensile testing. During tensile pre-deformation, several slip systems are activated and irregularly spaced slip bands form. A trace analysis revealed the presence of several slip bands on the tensile specimen near the grips while one family of slip bands parallel to the (1 1 1) crystallographic plane were detected in the middle of the tensile specimen. From the middle of the pre-deformed tensile specimens double microshear samples were prepared using focused ion beam (FIB) machining such that the [0 -1 -1] (1 -1 1) slip system could be directly activated. The results show how microshear behavior reacts to different levels of tensile pre-deformation. Sudden deformation events (SDEs) are observed during microshear testing. The critical stress associated with the first SDE is shown to increase with increasing pre-deformation as a result of an increasing number of slip bands introduced during pre-deformation per shear zone. The results allow also to obtain information on the interaction between dislocations activated during microshearing ([0 -1 -1].(1 -1 1)) and those which were introduced during tensile pre-deformation ([1 0 -1] (1 1 1) and [1 -1 0] (1 1 1)). When these slip systems interact glissile junctions and Lomer-Cottrell locks are likely to form. In the light of this analysis, we rationalize the occurrence of sudden deformation events based on piled up dislocation assemblies which overcome Lomer-Cottrell lock barriers.
- 出版日期2016-7
