Stability study of gear meshing area considering friction of tooth surface

作者：Li Xiaopeng^*; Sun Dehua; Liang Youjian; Wang Dan

来源：International Journal of Industrial and Systems Engineering, 2016, 22(4): 466-483.

DOI：10.1504/IJISE.2016.075206

• Double meshing
• Dynamic characteristics
• Exciting frequency
• Friction coefficients
• Poincare sections
• Single meshing
• Tooth surface
• Vibration differential equations

In order to study the spur gear's dynamic characteristics under the condition of considering tooth surface friction, tooth surface friction model is established based on Stribeck model and the change rule of friction coefficient is obtained. The vibration differential equations of single meshing area and double meshing area are established based on the friction coefficient and the numerical simulation of the vibration differential equations is carried out by using Runge-Kutta method, and the influence of various parameters on the system dynamic characteristics is obtained. It can be seen from the phase diagram and Poincare section that in the single meshing area and double meshing area, the following measures can enhance the stability of the system: increase the damping ratio, exciting frequency away from the resonance region, increase the load and reduce the gear backlash.

• 出版日期2016
• 单位东北大学; Northeastern university