Nanocrystalline mesoporous gamma-alumina powders "UPMC1 material" gathers thermal and chemical stability with high surface area

作者：Boissiere Cedric; Nicole Lionel; Gervais Christelle; Babonneau Florence; Antonietti Markus; Amenitsch Heinz; Sanchez Clement; Grosso David^*

来源：Chemistry of Materials, 2006, 18(22): 5238-5243.

DOI：10.1021/cm061489j

The designed elaboration of alumina sub-micrometric spherical powder that combines 3D ordered mesoporosity of high accessibility, nanocrystalline structure, and thermal stability up to 900 degrees C is reported. The strategy used to elaborate such new materials labeled "UPMC1" involves specific block-copolymer templating, aluminum sol-gel chemistry, tuned aerosol generation (spray drying), and sequential thermal treatments that allow designing of a whole set of mesoporous catalytic supports by adjusting ceramization conditions between 700 and 900 degrees C. When calcination temperature reaches 700 degrees C, the network remains amorphous and displays structural features of highly porous materials (i.e., porosity, 0.56 cm(3)center dot g(-1); surface area, 403 m(2)center dot g(-1); well-calibrated pore diameter, 13 nm). After 30 min at 900 C, crystallization into gamma-Al2O3 particles of around 6 nm has occurred, which has modified the network characteristics (i.e., porosity, 0.34 cm(3)center dot g(-1); surface area, 134 m(2)center dot g(-1); well-calibrated pore diameter, 12.5 nm) without destroying the mesostructure. Both amorphous and crystalline final materials present the remarkable properties of mesoporous materials with the unique amphoteric properties of the gamma-alumina surface (40% of tetragonal acid sites) that have great potential application in catalysis, in environment, and as an adsorbent. The present work points out that ordered mesoporosity has the ability to stabilize materials with amorphous or metastable crystalline structure at higher temperatures than what is observed for nonordered mesoporous analogous systems. Such a phenomenon is discussed on the basis of extensive materials characterization mainly based on TEM, XRD, and Al-29 high-resolution solid-state NMR.

• 出版日期2006-10-31