Hydrogen-enhanced fatigue life analysis of Cr-Mo steel high-pressure vessels

作者：Hua, Zhengli; Zhang, Xin; Zheng, Jinyang; Gu, Chaohua; Cui, Tiancheng; Zhao, Yongzhi; Peng, Wenzhu

来源：International Journal of Hydrogen Energy, 2017, 42(16): 12005-12014.

DOI：10.1016/j.ijhydene.2017.02.103

• Hydrogen storage
• 4130X
• Hydrogen embrittlement
• Fatigue crack growth rate
• Fatigue life

Cr-Mo steel high-pressure vessel made of 4130X is a promising economical candidate for hydrogen storage and transport in hydrogen refueling stations. However, the mechanical properties of 4130X in hydrogen gas and the hydrogen-enhanced fatigue life of a 4130X vessel with a design pressure higher than 45 MPa are not completely understood. In this work, the tensile and fatigue properties of 4130X at different positions of a manufactured vessel in 92 MPa hydrogen gas were studied. The fatigue life prediction for the 4130X vessel was performed using fracture mechanics method. The influences of initial crack size and outside diameter on the fatigue life were also investigated. Results indicate that the 4130X from the shoulder area attains a lower relative reduction of area (RRA) and higher fatigue crack growth rate (FCGR) in hydrogen gas than those of the specimens from the cylinder and juncture. The FCGR measured in hydrogen increases with increasing hydrogen pressure, and the FCGR in 92 MPa hydrogen gas is 30-50 times of the FCGR in air. As the initial crack size increases, not only the fatigue life of the hydrogen storage vessel decreases, but also the hydrogen-induced fatigue life loss is aggravated. Furthermore, the influence of outside diameter on the fatigue life of the hydrogen storage vessel is minimal.

• 出版日期2017-4-20
• 单位浙江大学