A new method of fabricating robust freeform 3D ceramic scaffolds for bone tissue regeneration

作者：Seol Young Joon; Park Dong Yong; Park Ju Young; Kim Sung Won; Park Seong Jin^*; Cho Dong Woo

来源：Biotechnology and Bioengineering, 2013, 110(5): 1444-1455.

DOI：10.1002/bit.24794

• bone tissue engineering
• ceramic scaffold
• additive manufacturing
• dilatometric analysis
• polymer infiltration

Fabrication of three-dimensional (3D) scaffolds with appropriate mechanical properties and desired architecture for promoting cell growth and new tissue formation is one of the most important efforts in tissue engineering field. Scaffolds fabricated from bioactive ceramic materials such as hydroxyapatite and tricalcium phosphate show promise because of their biological ability to support bone tissue regeneration. However, the use of ceramics as scaffold materials is limited because of their inherent brittleness and difficult processability. The aim of this study was to create robust ceramic scaffolds, which have a desired architecture. Such scaffolds were successfully fabricated by projection-based microstereolithography, and dilatometric analysis was conducted to study the sintering behavior of the ceramic materials. The mechanical properties of the scaffolds were improved by infiltrating them with a polycaprolactone solution. The toughness and compressive strength of these ceramic/polymer scaffolds were about twice those of ceramic scaffolds. Furthermore, the osteogenic gene expression on ceramic/polymer scaffolds was better than that on ceramic scaffolds. Through this study, we overcame the limitations of previous research on fabricating ceramic scaffolds and these new robust ceramic scaffolds may provide a much improved 3D substrate for bone tissue regeneration. Biotechnol. Bioeng. 2013; 110: 14441455.

• 出版日期2013-5