Dye adsorption onto mesoporous materials: pH influence, kinetics and equilibrium in buffered and saline media

作者：Gomez J M^*; Galan J; Rodriguez A; Walker G M

来源：Journal of Environmental Management, 2014, 146: 355-361.

DOI：10.1016/j.jenvman.2014.07.041

• Dye
• Adsorption
• Buffer
• Ionic strength
• Mesoporous

Mesoporous materials were used as adsorbents for dye removal in different media: non-ionic, buffered and saline. The mesoporous materials used were commercial (silica gel) as well as as-synthesised materials (SBA-15 and a novel mesoporous carbon). Dye adsorption onto all the materials was very fast and the equilibrium was reached before 1 h. The pH has a significant influence on the adsorption capacity for the siliceous materials since the electrostatic interactions are the driving forces. However, the influence of the pH on the adsorption capacity of the carbonaceous material was lower, since the van der Waals interactions are the driving forces. The ionic strength has a great impact on the siliceous materials adsorption capacity, being their adsorption capacity in a buffered medium six times higher than the corresponding to a non-ionic medium. Nevertheless, ionic strength does not influence on the dye adsorption on the mesoporous carbon. Overall, the as-synthesised carbon material presents a clear potential to treat dye effluents, showing high adsorption capacity (q(e) approximate to 200 mg/g) in all the pH range studied (from 3 to 11); even at low concentrations (C-e approximate to 10 mg/L) and at short contact times (t(e) %26lt; 30 min).

• 出版日期2014-12-15