A new digital-analog multiplex method using an adder circuit

作者：Nakamura Y^*; Shimazoe K; Takahashi H

来源：Journal of Instrumentation, 2015, 10(03): C03048.

DOI：10.1088/1748-0221/10/03/C03048

• Analogue electronic circuits
• Front-end electronics for detector readout
• Data acquisition concepts
• Digital signal processing (DSP)

In this paper, we propose a new multiplex method for the Time-over-Threshold (ToT) method using an adder circuit to encode channel information in the pulse height. The proposed method is a combination of Multiple-Valued-Logic (MVL) and the ToT method for radiation-detection systems. In order to validate the method, a 12 mm x 12 mm x 12 mm monolithic GAGG crystal was mounted on a 16ch HAMAMATSU MPPC, whose pixel size was 3 mm x 3 mm. The input resistors of the adder circuit were set at 2 k Omega, 4 k Omega, 8 k Omega, 16 k Omega, and so on, and the feedback resistor was set at 1 k Omega. Therefore, the output voltage becomes 1/2, 1/4, 1/8, ... , for ch1, ch2, ch3, ... , respectively. A 4ch-input multiplex, which corresponds to 16-valued logic, was successfully verified. However, an 8ch-input multiplex corresponding to 256-valued logic was not verified, owing to noise factors such as ringing and overshoot. Therefore, a new decoding algorithm or a noise-cutting circuit is needed.

• 出版日期2015-3