Study of thermoluminescence response of purple to violet amethyst quartz from Balikesir, Turkey

作者：Nur N^*; Yegingil Z; Topaksu M; Kurt K; Dogan T; Sarigul N; Yuksel M; Altunal V; Ozdemir A; Guckan V; Gunay I

来源：Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms , 2015, 358: 6-15.

DOI：10.1016/j.nimb.2015.05.011

• Amethyst
• Thermoluminescence
• Dose response
• TL
• Dosimeters

In thermoluminescence (TL) dosimetry, the phosphor amethyst quartz as a thermoluminescent, appears to be one of the materials arousing the highest interest. In this study the dosimetric characteristics of natural amethyst quartz crystals collected from Balikesir-Dursunbey (Turkey) were investigated for the purpose of determination of the general properties that phosphors should have in order to be useful for thermoluminescence dosimetry. The natural thermoluminescence was drained by annealing the powder samples at 450 degrees C for 1.5 h. The effects of high temperature annealing, dose response curves, glow curves after a postirradiation annealing, reusability of the samples and storage of trapped electrons in dark at room temperature were clarified through irradiating the samples with the desired exposures by Sr-90/Y-90 beta particles.
Isothermal annealing before and after irradiation was found to have a definite effect upon the TL glow curve of amethyst crystal powder. The same sample varied in sensitivity depending upon its previous thermal and radiation history. The peak heights of the glow peaks were examined with respect to dose response at dose levels between 1 Gy and 5 kGy. The intermediate temperature (IT) and high temperature (HT) peaks of 230 degrees C and 300 degrees C, respectively, exhibit dose-response curves as superlinear when dose is on the logarithmic scale except the dose response of 300 degrees C peak for the dose values of 1 < D < 20 Gy in which linear dose response was acquired. At the end of the storage time between exposure and readout which was about one month at room temperature, the emitted light reduction was 14% comparing to the initial state. Repeating the measurements of the same sample, exposed with 0.1, 0.5, 0.8 and 1 kGy beta exposures, resulted in between 4% and 11% increase in the TL sensitivity of the material.

• 出版日期2015-9-1