A 3.9 mW Bluetooth Low-Energy Transmitter Using All-Digital PLL-Based Direct FSK Modulation in 55 nm CMOS

作者：Oh SeongJin; Kim SungJin; Ali Imran; Truong Thi Kim Nga; Lee DongSoo; Pu YoungGun; Yoo Sang Sun; Lee Minjae; Hwang Keum Cheol; Yang Youngoo; Lee Kang Yoon^*

来源：IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS I-REGULAR PAPERS, 2018, 65(9): 3037-3048.

DOI：10.1109/TCSI.2018.2803680

• Direct modulation
• ADPLL
• BLE
• FSK transmitter
• low power

This paper presents a low-power frequency-shift keying (FSK) transmitter (TX) with an all-digital phase locked loop (ADPLL) based on direct modulation for use in Bluetooth low energy application. A low power ADPLL with a Retimer, 2-stage time to digital converter, and gain estimation technique is proposed to achieve low-power direct FSK modulation at 1 Mbps data rate. A high-efficiency class-D power amplifier, with dual output power modes and a ramping digital filter (RDF), is proposed to reduce the spurious tones. The proposed TX is implemented on 1P6M 55-nm CMOS technology with a die size of 0.53 mm(2). The phase noise is -119 dBc/Hz at a 1 MHz offset with frequency of 2.44 GHz. TX output power levels of 1.6 and 10 dBm have a power consumption of 3.9 and 18 mW, respectively. The power control ranges for the 1.6 and 10 dBm modes are 25 and 23 dB, respectively. With the RDF, when the output level is + 1.6 dBm, the second, and third harmonic distortions at the TX output are -44 and -49 dBm, respectively. The proposed TX achieves an error vector magnitude of 3.48% at an output power level of + 1.6 dBm.

• 出版日期2018-9