Sources of Variability and Lower Values in Toughness Measurements of Weld Metals

作者：Cao, R.^*; Yuan, J. J.; Xiao, Z. G.; Ma, J. Y.; Mao, G. J.; Zhang, X. B.; Chen, J. H.

来源：Journal of Materials Engineering and Performance, 2017, 26(6): 2472-2483.

DOI：10.1007/s11665-017-2686-7

• fracture
• HSLA weld metal
• toughness
• variability

In this paper, the sources of variability and lower values in toughness measurements of a high-strength low alloy weld metal are investigated by detailed observations of fracture surfaces and the microstructures at crack initiation. The results reveal that the variability of the notch Charpy toughness is related to the location of the cleavage initiation origins. The three factors jointly contribute to give rise to variability and lower value of toughness. That is, (1) the location that the notch is sampled at deposited weld metal or reheated weld metal, (2) the location that a large grain region is appeared on the path ahead of the notch root, (3) the distributed location of the defect or the brittle second-phase particle. When three factors were simultaneously satisfied, the lower value of the Charpy toughness is appeared. The notch is sampled at the largest grain region at deposited weld metal, and the defect or the brittle second-phase particle is close to the notch root and sampled by its high stress field, the lowest Charpy toughness is obtained.

• 出版日期2017-6
• 单位兰州理工大学