科研之友
微信
新浪微博
Facebook
分享链接
摘要
Bio-oil produced from prolysis process of biomass cannot be directly used for transportation fuels, because of the poor quality. Catalytic hydrogenation is then used to upgrade bio-oil to engine-grade fuel. However, external H-2 addition may not be cost effective to obtain high quality of oil. In this work, the feasibility of in situ hydrogen generation and hydrodeoxygenation is studied. Formic acid and acetic acid were selected as compounds for hydrogen generation by reforming reaction. Furfural and phenol were used as model bio-oil compounds and were hydrogenated by in situ generated hydrogen from these acids using commercial Pd/C and Nickel based catalysts, RZ409. The reaction was performed in a batch-scale reactor at 300 degrees C for 3 h. The amount of H-2 generation depended on the type of catalyst and substrate used. For example, 1 mol formic acid yielded 0.46 mol H-2 (46% yield) and 0.46 mol CO2 with Pd/C, while it produced only 0.15 mol H-2 and 0.15 mol CO2 with RZ490. The Furfural and phenol could be hydrogenrated and translated to different byproducts with in situ generated H-2, with some byproducts identified. The results provide a clear rationale for utilization of in situ generated H-2 for future bio-oil upgrading to reduce external H-2 usage.
- 出版日期2014-10
- 单位郑州大学
