科研之友
微信
新浪微博
Facebook
分享链接
摘要
Photo sensitive polymer SU-8, owing to its excellent mechanical properties and dielectric properties on polymerization, is widely used in MEMS device fabrications. However, the removing, stripping or re-patterning of the cross-linked SU-8 is a difficult issue. In this paper, CF4/O-2 gas mixture provided by a plasma asher equipment was used for the patterning of cross-linked SU-8 material. The RF power, the temperature of the substrate holder, chamber pressure and gas concentration were optimized for the cross-linked SU-8 etching process. When the CF4/O-2 mixture contains about 5% CF4 by volume, the etching rate can be reached at 5.2 mu m/min.
- 出版日期2016-5
- 单位大连理工大学
