Dynamically vulcanized ethylene propylene diene terpolymer/nylon thermoplastic elastomers

作者：Huang, H^*; Yang, JL; Liu, X; Zhang, YX

来源：European Polymer Journal, 2002, 38(5): 857-861.

DOI：10.1016/S0014-3057(01)00270-1

• EPDM
• nylon
• TPE
• dynamic vulcanization
• compatibilizer

A thermoplastic elastomer (TPE) of ethylene propylene diene terpolymer (EPDM) and nylon with excellent mechanical properties was prepared by dynamic vulcanization. The effects of the curing systems, compatibilizer, nylon content and reprocessing on the mechanical properties of EPDM/nylon TPEs were investigated in detail. Experimental results indicate that maleic anhydride (MAH) grafted EPR has a better performance in compatibilizing the EPDM/nylon blends compared with other compatibilizers containing acid group. Tensile strength and elongation at break go through a maximum value at a compatibilizer resin content (on total rubber dosage) of 20%. EPDM/nylon TPE using sulfur as curative has higher tensile strength and elongation than that of TPE using phenolic resin or peroxide as curatives. Tensile strength and elongation at break increase with increasing nylon content. Scanning electron microscopy results show that rubber particles distributed at an average size of 1 mum in dynamic vulcanized EPDM/MAH-g-EPR/nylon TPE.

• 出版日期2002-5
• 单位上海交通大学