A 3D two-scale multiplane cohesive-zone model for mixed-mode fracture with finite dilation

作者：Serpieri R^*; Albarella M; Sacco E

来源：Computer Methods in Applied Mechanics and Engineering, 2017, 313: 857-888.

DOI：10.1016/j.cma.2016.10.021

• Three-dimensional cohesive-zone model
• Interlocking
• Finite dilation
• Mixed-mode delamination
• Damage friction coupling

A 3D multi-scale cohesive-zone model (CZM) combining friction and finite dilation by a multi-plane approach (M-CZM), based on the concept of Representative Multiplane Element (RME), is developed within the mechanics of generalized continua for the analysis of mixed-mode fracture.
The proposed M-CZM formulation captures the increase of measured fracture energy in mode II as a natural effect of multi scale coupling between cohesion, friction and interlocking, employing a reduced set of micromechanical parameters characterized by a well-defined micromechanical interpretation. This permits to devise clear calibration and identification procedures for 3D fracture problems.
Upon assessing the retrieval, by a regular 5-plane RME, of a quasi-isotropic response for fracture resistance and for dilation, the M-CZM is employed in FEM simulations of Double-Cantilever Beam (DCB) tests to obtain predictions of mixed mode I II and mixed mode I-III fracture resistance.
The DCB analyses show the key role of the characteristic height of asperities in determining the macroscopic fracture resistance in both mixed mode I-II and I-III interactions. Numerical results also show the independence of the mode-I fracture resistance on the geometry of the beam section and a marked dependence of the measured mixed-mode fracture resistance on the section aspect ratio.

• 出版日期2017-1-1