Ultrafine-grained pure Ti recycled by equal channel angular pressing with high strength and good ductility

作者：Luo P^*; McDonald D T; Palanisamy S; Dargusch M S; Xia K

来源：Journal of Materials Processing Technology, 2013, 213(3): 469-476.

DOI：10.1016/j.jmatprotec.2012.10.016

• Titanium
• Machining chips
• Recycling
• Equal channel angular pressing

Machining chips of commercially pure Ti (ASTM grade 2) were consolidated into full density by equal channel angular pressing (ECAP) with an average grain size as low as 0.8 mu m, yield strength up to 650 MPa, and ductility of similar to 16%. Effect of recycling condition on the microstructure and mechanical properties were investigated in terms of ECAP temperature, number of passes and chemical composition. Using electron backscatter diffraction it is evident that continuous dynamic recrystallization (however, which is purely a phenomenological terminology) plays a significant role in grain (with misorientation >= 15 degrees) formation, whilst benefitting from high stacking fault energy, this continuous conversion of subgrain (<15 degrees) into grain can be essentially considered as an extended recovery with a substantial presence of low angle grain boundaries in the recycled Ti. The Hall-Petch relationship is adapted to explain the strengthening of the recycled Ti. Additionally, using scanning electron microscopy fractography, the ductility was analyzed by a modified Griffith criterion. Last, superior energy efficiency of ECAP reduces environmental impact when comparing to conventional melting/casting. ECAP develops an innovative solid-state process for improving the recycling value of waste Ti.

• 出版日期2013-3