A design methodology for a magnetorheological fluid damper based on a multi-stage radial flow mode

作者：Liao C R^*; Zhao D X; Xie L; Liu Q

来源：Smart Materials and Structures, 2012, 21(8): 085005.

DOI：10.1088/0964-1726/21/8/085005

In this paper, a magnetorheological (MR) fluid damper based on a multi-stage radial flow mode is put forward, compared with traditional ones with annular damping channel which are of low magnetic field utilization and high energy consumption. The equivalent magnetic circuit model is derived, along with the relation between the magnetic induction at the working gap and the exciting current in the field coils. The finite-element software ANYSY is used to analyze the distribution of the magnetic field in the MR valve. The flow differential equation for a MR fluid in radial flow is theoretically set up, and the numerical solution is validated by means of the Herschel-Bulkley constitutive model. A MR damper was designed and fabricated in Chongqing University in accordance with the technical requirements of a railway vehicle anti-yaw damper, and the force-displacement characteristic of the damper was tested with J95-I type shock absorber test-bed. The results show that the experimental damping forces are in good agreement with the analytical ones, and the methodology is believed to help predict the damping force of a MR damper.

• 出版日期2012-8
• 单位重庆大学