A sulfuric-lactic acid process for efficient purification of fungal chitosan with intact molecular weight

作者：Naghdi Mitra; Zamani Akram^*; Karimi Keikhosro

来源：International Journal of Biological Macromolecules, 2014, 63: 158-162.

DOI：10.1016/j.ijbiomac.2013.10.042

• Alkali-insoluble material (AIM)
• Fungal cell wall
• Rhizopus ozyzae
• Fungal chitosan
• Lactic acid
• Sulfuric acid

The most recent method of fungal chitosan purification, i.e., two steps of dilute sulfuric acid treatment, pretreatment of cell wall at room temperature for phosphate removal and extraction of chitosan from the phosphate free cell wall at high temperature, significantly reduces the chitosan molecular weight. This study was aimed at improvement of this method. In the pretreatment step, to choose the best conditions, cell wall of Rhizopus oryzae, containing 9% phosphate, 10% glucosamine, and 21% N-acetyl glucosamine, was treated with sulfuric, lactic, acetic, nitric, or hydrochloric acid, at room temperature. Sulfuric acid showed the best performance in phosphate removal (90%) and cell wall recovery (89%). To avoid depolymerisation of chitosan, hot sulfuric acid extraction was replaced with lactic acid treatment at room temperature, and a pure fungal chitosan was obtained (0.12 g/g cell wall). Similar pretreatment and extraction processes were conducted on pure shrimp chitosan and resulted in a chitosan recovery of higher than 87% while the reduction of chitosan viscosity was less than 15%. Therefore, the sulfuric-lactic acid method purified the fungal chitosan without significant molecular weight manipulation.

• 出版日期2014-2