科研之友
微信
新浪微博
Facebook
分享链接
摘要
This paper presents the application of a fully flexible valve actuation system for non-throttled load control of an internal combustion engine. A novel camless valve actuation system with a unique hydro-mechanical internal feedback mechanism which simplifies the external control design is first introduced. All the critical parameters describing the engine valve event, i.e., lift, timing, duration and seating velocity, can be continuously varied by controlling the triggering timings of three two-state valves. Initial testing of a prototype experimental setup reveals that the performance of the system (transient tracking and steady-state variability) is influenced purely by the state of the system when the internal feedback mechanism is activated. This feature motivates the development of a cycle-to-cycle learning-based external control for activating the internal feedback mechanism based on the desired valve profile characteristics and the system state. To verify the proposed control methodology, it is implemented on the experimental system to track reference trajectories for the various valve event parameters corresponding to the non-throttled load control of an engine during the U.S. Federal Test Procedure (FTP) urban driving cycle. Vehicle load demand analysis is used to compute the desired engine speed and torque requirements. Detailed dynamic valve flow simulations assuming full flexibility of the engine valve event parameters help to calculate the required trajectory of all these parameters to satisfy the speed and torque requirements without the use of a throttle. The experimental results show that the proposed framework, i.e., the valve actuation system and the external control methodology, is able to provide excellent performance even during the most aggressive transient operating conditions.
- 出版日期2011-12
