Dataglove-based interface for impedance control of manipulators in cooperative human-robot environments

作者：Paredes Madrid L^*; Gonzalez de Santos P

来源：Measurement Science and Technology, 2013, 24(2): 025005.

DOI：10.1088/0957-0233/24/2/025005

• impedance control
• dataglove
• interface
• piezoresistive
• force sensor
• IMU
• manipulator

A dataglove-based interface is presented for tracking the forces applied by the hand during contact tasks with a 6-degree-of-freedom (DOF) manipulator. The interface uses 11 force sensors carefully placed on the palm-side fabric of a 16 DOF dataglove. The force sensors use piezoresistive technology to measure the individual force components from the hand. Based on the dataglove measurements, these components are transformed and summed to assemble the resultant force vector. Finally, this force vector is translated into the manipulator frame using orientation measurements from an inertial measurement unit placed on the dorsal side of the dataglove. Static tests show that the dataglove-based interface can effectively measure the applied hand force, but there are inaccuracies in orientation and magnitude when compared to the load cell measurements used as the reference for error calculation. Promising results were achieved when controlling the 6 DOF manipulator based on the force readings acquired from the dataglove interface; the decoupled dynamics of the dataglove interface with respect to the robot structure yielded smooth force readings of the human intention that could be effectively used in the impedance control of the manipulator.

• 出版日期2013-2