Anti-icing/frosting and self-cleaning performance of superhydrophobic aluminum alloys

作者：Feng, Libang^*; Yan, Zhongna; Shi, Xueting; Sultonzoda, Firdavs

来源：Applied Physics A, 2018, 124(2): 142.

DOI：10.1007/s00339-017-1509-x

• EXCELLENT CORROSION-RESISTANCE
• SURFACE-ROUGHNESS
• HETEROGENEOUS NUCLEATION
• ANTIICING PERFORMANCE
• COATINGS
• WETTABILITY
• FABRICATION
• PROPERTY
• DENSITY
• LAYER

Ice formation and frost deposition on cryogenic equipment and systems can result in serious problems and huge economic loss. Hence, it is quite necessary to develop new materials to prevent icing and frosting on cold surfaces in engineering fields. Here, a superhydrophobic aluminum alloy with enhanced anti-frosting, anti-icing, and self-cleaning performance has been developed by a facile one-step method. The anti-frosting/icing performance of superhydrophobic aluminum alloys is confirmed by frosting/icing time delay, consolidating and freezing temperature reduction, and lower amount of frost/ice adhesion. Meanwhile, the excellent self-cleaning performance is authenticated by the fact that simulated pollution particles can be cleaned out by rolling water droplets completely. Finally, based on the classical nucleation theory, anti-icing and anti-frosting mechanisms of the superhydrophobic aluminum alloys are deduced. Results show that grounded on "air cushion" and "heat insulation" effect, a larger nucleation barrier and a lower crystal growth rate can be observed, which, hence, inhibit ice formation and frost deposition. It can be concluded that preparing superhydrophobic surfaces would be an effective strategy for improving anti-icing, anti-frosting, and self-cleaning performance of aluminum alloys.

• 出版日期2018-2
• 单位兰州交通大学