AFM tip characterization by using FFT filtered images of step structures

作者：Yan, Yongda^*; Xue, Bo; Hu, Zhenjiang; Zhao, Xuesen

来源：Ultramicroscopy, 2016, 160: 155-162.

DOI：10.1016/j.ultramic.2015.10.015

• Atomic force microscope
• Step structure
• Spectrum of image
• Tip characterization

The measurement resolution of an atomic force microscope (AFM) is largely dependent on the radius of the tip. Meanwhile, when using AFM to study nanoscale surface properties, the value of the tip radius is needed in calculations. As such, estimation of the tip radius is important for analyzing results taken using an AFM. In this study, a geometrical model created by scanning a step structure with an AFM tip was developed. The tip was assumed to have a hemispherical cone shape. Profiles simulated by tips with different scanning radii were calculated by fast Fourier transform (FFT). By analyzing the influence of tip radius variation on the spectra of simulated profiles, it was found that low-frequency harmonics were more susceptible, and that the relationship between the tip radius and the low-frequency harmonic amplitude of the step structure varied monotonically. Based on this regularity, we developed a new method to characterize the radius of the hemispherical tip. The tip radii estimated with this approach were comparable to the results obtained using scanning electron microscope imaging and blind reconstruction methods.

• 出版日期2016-1
• 单位哈尔滨工业大学