Analysis of liquid sodium purity by laser-induced breakdown spectroscopy. Modeling and correction of signal fluctuation prior to quantitation of trace elements

作者：Maury Cecile^*; Sirven Jean Baptiste; Tabarant Michel; L'Hermite Daniel; Courouau Jean Louis; Gallou Catherine; Caron Nadege; Moutiers Gilles; Cabuil Valerie

来源：Spectrochimica Acta Part B: Atomic Spectroscopy , 2013, 82: 28-35.

DOI：10.1016/j.sab.2012.12.005

• Laser-induced breakdown spectroscopy
• Liquid sodium
• Limit of detection
• Noise
• Signal correction

Liquid sodium is used as coolant in sodium-cooled fast nuclear reactors. Among many parameters to monitor to ensure the safe operation of the reactor, the coolant chemical purity is a relevant indicator of several undesirable situations, like corrosion of structural materials or sodium contamination, which may release different elements in the coolant. Several techniques have already been implemented to measure the sodium purity, but their response time is long and not suited for continuous monitoring. Therefore, as a complement to them, laser-induced breakdown spectroscopy (LIES) is considered as a promising technique for real-time analysis of the coolant purity. In this paper we report on the first LIBS quantitative measurements performed in liquid sodium at 150 degrees C. Calibration curves were traced for lead and indium using the standard addition method. Important intensity drifts and fluctuations were observed, mostly due to pressure variations in the sodium oven. Background subtraction and/or normalization was used to compensate for those intensity fluctuations. To describe the effect of these corrections on the analytical signal noise, a simple model was proposed and its results were found to satisfactorily fit the experimental data. Using this approach, the best detection limits were obtained for the background-subtracted and normalized data, and were found to be 6 ppm for lead and 5 ppm for indium.

• 出版日期2013-4-1
• 单位中国地震局