Analysis and experimental study of the temperature and stress distribution in the slab of a solid-state heat capacity laser - art. no. 66221I

作者：Yang Jiankun^*; Wan Xuebin; Xu Xiaojun; Lu Qisheng

来源：International Conference on Photoelectronic Detection and Imaging, 2007-09-09 to 2007-09-12.

• solid state heat capacity laser (SSHCL)
• temperature and stress distribution
• slab

In conventional cooling operation, thermal effects and stress distribution in slabs of solid-state laser are presented by many workers, it is different with that in the solid state heat capacity laser. In this paper, the transient temperature and stress distribution in Xeon flash lamps pumped slabs for single-shot and repetitively pulsed operations will be produced in the heat capacity operation. A high speed CCD camera was used to set up an experiment system to measure the interference fringes, from these fringes' changes, the extension of the slab due to the stress and thermal expansion can be obtained. Since dielectric materials are inherently several factors stronger in compression than in tension, this temperature reversal in heat capacity operation increases the inherent fracture limit of the system and allows a heat capacity operated laser to be pumped much harder than a conventionally operated slab laser.

• 出版日期2008
• 单位中国人民解放军国防科学技术大学