A novel photoreactor for the production of electrosterically stabilised colloidal particles at larger scales

作者：Schrinner Marc; Haupt Bjoern; Wittemann Alexander^*

来源：Chemical Engineering Journal, 2008, 144(1): 138-145.

DOI：10.1016/j.cej.2008.07.018

• Colloidal particles
• Polyelectrolyte brush
• Polymer latex
• Emulsion polymerization
• Photopolymerization
• Electrosteric stabilization
• Suspension
• Grafting from

A novel photoreactor to facilitate electrosteric stabilization of colloidal polymer particles is presented. Anionic and cationic polystyrene particles having a diameter of ca. 100 nm and bearing a thin layer of photoinitiator are used as seed colloids. Anionic and cationic chains of weak or strong polyelectrolytes are grafted onto the surface of these particles. The polyelectrolyte chains are densely tethered onto the surface of the polymer particles. For this purpose, a commercial photoreactor setup developed for water and liquid waste treatment has been adapted. Compared to the photoreactor used earlier for photoemulsion polymerization, the new reactor largely shortens the reaction times and improves the reproducibility of the reaction. This is achieved by the higher UV power and controlled radiation times and power.

• 出版日期2008-10-1