Numerical investigation of the affecting parameters on the shear failure of Nonductile RC exterior joints

作者：Niroomandi Arsalan^*; Najafgholipour M A; Ronagh H R

来源：Engineering Failure Analysis, 2014, 46: 62-75.

DOI：10.1016/j.engfailanal.2014.08.003

• Nonlinear finite element analysis
• Parametric study
• Nonductile reinforced concrete
• beam-column joints
• Shear failure
• Shear strength

In this paper, a parametric study has been carried out on reinforced concrete (RC) exterior beam-column joints without transverse reinforcement in the joint region. This type of joints belongs to a group of RC structures classified as non-ductile RC buildings. In the previous investigations, special attention is paid to the joint aspect ratio and beam longitudinal reinforcement ratio. These parameters have been shown by other researchers to govern the joint shear behavior, although the degree of influence was not scrutinized to the degree required. The results of the current study confirmed once again that these parameters have a significant influence on the shear failure in RC joints. Apart from that, the degree of influence has been quantified in great detail. The findings suggest that the correct selection of these parameters is extremely important in the design of RC buildings, and a wrong choice may adversely affect the behavior.

• 出版日期2014-11