Measurement of temperature and pressure on the surface of a blunt cone using FBG sensor in hypersonic wind tunnel

作者：Prasad A S Guru^*; Sharath U; Nagarjun V; Hegde G M; Asokan S

来源：Measurement Science and Technology, 2013, 24(9): UNSP 095302.

DOI：10.1088/0957-0233/24/9/095302

• fiber Bragg grating sensor
• temperature and pressure measurements
• wind tunnel
• temperature sensor package

Measurement of temperature and pressure exerted on the leeward surface of a blunt cone specimen has been demonstrated in the present work in a hypersonic wind tunnel using fiber Bragg grating (FBG) sensors. The experiments were conducted on a 30 degrees apex-angle blunt cone with 51 mm base diameter at wind flow speeds of Mach 6.5 and 8.35 in a 300 mm hypersonic wind tunnel of Indian Institute of Science, Bangalore. A special pressure insensitive temperature sensor probe along with the conventional bare FBG sensors was used for explicit temperature and aerodynamic pressure measurement respectively on the leeward surface of the specimen. computational fluid dynamics (CFD) simulation of the flow field around the blunt cone specimen has also been carried out to obtain the temperature and pressure at conditions analogous to experiments. The results obtained from FBG sensors and the CFD simulations are found to be in good agreement with each other.

• 出版日期2013-9