A Comparison Among Neo-Hookean Model, Mooney-Rivlin Model, and Ogden Model for Chloroprene Rubber

作者：Kim Beomkeun; Lee Seong Beom^*; Lee Jayone; Cho Sehyun; Park Hyungmin; Yeom Sanghoon; Park Sung Han

来源：International Journal of Precision Engineering and Manufacturing, 2012, 13(5): 759-764.

DOI：10.1007/s12541-012-0099-y

• Hyperelastic model
• Neo-Hookean model
• Mooney-Rivlin model
• Ogden model
• Chloroprene rubber
• Uniaxial test
• Biaxial test
• Planar test

Neo-Hookean model and Mooney-Rivlin model are hyperelastic material models where the strain energy density function is made from invariants of the left Cauchy-Green deformation tensor. Even though Ogden model is a hyperelastic material model, its strain energy density function is expressed by principal stretch ratio. These three models have been widely used in industries. Recently, Ogden model, especially Ogden 3rd model, shows better agreement with the test data than others. In spite of the limitations to describe particular stress states, it is known that reasonable results using these models can be obtained for various structural components. In this research, three kinds of models are considered for Chloroprene rubber. Three kinds of tests (Uniaxial tension test, Biaxial tension test, and Planar shear test) are performed for Chloroprene specimen and through four kinds of test combinations (Uni+Bi, Uni+Pl, Bi+Pl, Uni+Bi+Pl), numerical simulations are carried out for Neo-Hookean model, Mooney-Rivlin model, and Ogden model. It is shown that Mooney-Rivlin model and Ogden model can be used for Clzloroprene Rubber in the specific ranges for Isotropic Hyperelastic model.

• 出版日期2012-5